基于工程状态标定的诊断载荷试验识别方法及应用

针对在役公路梁式桥梁由于材料性能退化及外部环境等因素共同作用而导致承载力不足、耐久性降低等问题,开展旧桥力学性能的快速诊断试验研究。通过诊断性载荷试验的理论分析和有限元模型标定流程研究,快速、高效地完成在役公路桥梁的承载力性能测量和评估,从而为在役公路桥梁结构的养护管理提供可靠的技术支持。     

LBM investigation of a Cu-water nanofluid over various configurations of pipes in the mixed convection flow

Increasing the heat capacity of heat exchangers is a crucial need for modern devices. The thermal conductivity of the usual fluids and the Nusselt (Nu) number of flows containing such fluids are two bottlenecks in the way of increasing heat delivery in the heat exchangers. For this reason, nanofluids have been introduced. The effect of utilizing a Cu-water nanofluid as a coolant of two hot pipes in a square cavity is investigated numerically with a two-component lattice Boltzmann method. The volume fraction of nanoparticles is assumed to be constant (0.03) while the Richardson (Ri) number varies from 0.02 to 20. Results show that the effectiveness of nanoparticles is better observed in the natural convection mode. However, sedimentation is also very probable at high Ri numbers, which significantly reduces the effectiveness of the nanoparticles. Configurations which produce a natural convection stream similar to the forced convection one as well as the configurations with high spacing and hence, low heat stream interactions, are the best choices for a uniform heat rate from the pipes.     

西汉徐地鲁恭王宫苑园林——鲁灵光殿研究

汉代是中国园林的形成阶段,不仅园林建筑物有所增加,成为住宅的延伸与扩展,而且人工造景比重也增大,造园要素趋于完备。园林的内容与功能随着社会生活的改变而逐步多样和完善,不仅是射猎、走狗、跑马的场所,还可以是游船、宴乐、赏鱼虫走兽、观看百戏的地方。造园在布局上也采用灵活多变的手法,按功能的需要,穿插安置不同形式的厅堂、楼阁、亭榭等。通过对鲁灵光殿时代背景及汉代园林、建筑营造形式的深入研究,结合文献的相关记述,梳理出鲁灵光殿的沿革,并以此为依据,对鲁灵光殿进行复原。     

Stress wave propagation in adhesively bonded functionally graded cylinders: an improved model

This study presents an improved mathematical model to analyse the stress wave propagation in adhesively bonded functionally graded (FG) circular cylinders (butt joint) under an axial impulsive load. The volume fractions of the material constituents in the upper and lower cylinders were functionally tailored through the thickness of each cylinder using a power-law. The effective material properties of both cylinders, which are made of aluminum (Al) and silicon carbide (SiC), at any point were predicted by using the Mori–Tanaka homogenization scheme. In this improved model, the governing equations of the wave propagation include the spatial derivatives of local mechanical properties and were discretized by means of the finite difference method. The influence of these spatial derivatives and the compositional gradient exponent on the displacement and stress distributions of the joint was investigated. The material composition variations of both cylinders affected the displacement and stress fields whereas the compositional gradient exponent had a minor effect. The stress concentrations were alleviated in time, the displacement and stress distributions/variations around/along the upper and lower cylinder-adhesive interfaces were significantly affected by the adhesive layer. The spatial derivatives also affected the temporal histories of the displacement and stress components evaluated at the selected critical points of the upper cylinder, adhesive layer and lower cylinder. The consideration of the spatial local material derivatives provided a more accurate mathematical model of wave propagations through the graded layered structures.     

环境中污染源废气检测方法及影响因素分析

对污染源废气监测原理进行了简单分析,阐述了当前我国常用的环境中污染源废气检测方法,并对废气检测影响因素及质量控制进行了深入探究。     

Effect of Operating Parameters on Gas‐Solid Hydrodynamics and Heat Transfer in a Spouted Bed

Through a combined computational fluid dynamics and discrete element method approach, the effect of the operating parameters on the hydrodynamics and heat‐transfer properties of gas‐solid two‐phase flows in a spouted bed are extensively investigated. Considering the high velocity in the fountain region, gas turbulence is resolved by employing the large‐eddy simulation. The rolling friction model is adopted for more precise predictions of solid behavior near the wall. Subsequently, the gas‐solid flow patterns, gas‐solid velocities, and temperature evolution are investigated. Moreover, different operating conditions and geometry configurations are evaluated with respect to heat‐transfer performance. The results provide a fundamental understanding of heat‐transfer mechanisms in spouted beds.     

Reduced‐order method for mathematical modeling of multiphase dc‐dc converter

A multiphase dc‐dc converter is effective for miniaturization and achieving high‐power density in a switching power supply. However, its mathematical modeling becomes complex as the phase number of the circuit increases. This study proposes a new modeling method to derive a reduced‐order method in a simple manner. The frequency characteristics of the reduced‐order model are fit to those of the original mathematical model of the multiphase dc‐dc converter. Therefore, the efficacy of the proposed method is validated.     

Soybean Trypsin Inhibitor Assay: Further Improvement of the Standard Method Approved and Reapproved by American Oil Chemists’ Society and American Association of Cereal Chemists International

For measuring trypsin inhibitor (TI) activities in soybean products, the current standard method, approved and reapproved by American Oil Chemists Society (Method Ba 12-75) and American Association of Cereal Chemists International (Method 22-40.01), features mixing trypsin with a series of inhibitor levels and then adding a substrate to start the colorimetric reaction. Yet, previous studies have shown flaws with the method, particularly with using several inhibitor levels and the sequence of adding the substrate last. The present study showed that with varying levels of dilution and volumes of a dilute sample extract, the pH of the premix (the mixture of a dilute sample extract and trypsin solution) ranged 3.30–3.60 for raw soy flour, and 3.20–6.70 for toasted soy. Within these premix pH ranges, the standard method of adding substrate last would give TI values equal to or less than those measured by the same method except for adding the enzyme last. The standard method was subsequently improved by using a single sample extract level and the enzyme-last sequence. Other modifications included making stock solutions for reagents, adding Ca²⁺ to the trypsin solution, diluting sample extracts to a level that causes 30–70% of inhibition, and running both reference and sample blanks for better controls. Alternatively, the full volume assay (10 mL total, as in the standard method) was further modified by using half the volume of each reagent with the same concentration. Compared to the standard method, the improved methods gave more consistent results when assaying 11 selected soy products. The half volume (5 mL) and full volume methods gave the same results, but the former could increase assay sensitivity and reduce amounts of reagents used.     

杭州湾南岸滩涂沉积物中HCHs与DDTs污染特征分析

摘 要：目的 了解六六六（hexachlorocyclohexanes,HCHs）与滴滴涕(dichloro diphenyl trichloroethanes,DDTs)在杭州湾南岸滩涂沉积物中的污染现状。方法 于2018年4月，采集杭州湾南岸地区4个采样点不同深度（0~80 cm）滩涂沉积物，利用气相色谱-串联质谱法（gas chromatography tandem mass spectrometry, GC-MS/MS）测定了该区域中HCHs与DDTs的含量，对其分布规律进行分析，使用共识沉积物质量基准法对其生态学风险进行了评估。结果 所有样品中均检出，HCHs与DDTs含量分别为4.20~6.24 μg/kg与3.37~4.73 μg/kg，主要以β-HCH、δ-HCH以及DDE为主，其污染主要来源于历史性工业品，整体污染处于较低水平；20.3%的沉积物样品中DDEs含量以及28.1%的样品DDTs总量介于阈值效应浓度(threshold concentration, TECs) 和可能效应浓度(probable effect concentration, PECs)之间。结论 杭州湾南岸沉积物中HCHs与DDTs的污染处于较低水平，具有较小的生态学风险。     

环境监测的现状、发展及优化对策浅析

社会经济的快速发展对生态环境造成了较大破坏,并产生了一系列连锁反应,不利于我国可持续发展目标的实现。为此,必须要切实做好环境监测工作。本文从环境监测的概念出发,就现阶段的环境监测现状进行了分析,并在此基础上阐述了环境监测工作未来发展及优化对策,以供参考。